LM 32 Mast Rake Question

[chrismunson]

Does anyone have any data or a diagram of the degree of fore or aft rake the LM 32 mast should be set at? I think there was a factory set-up diagram, but I cannot find it.

[jandane]

I do not think you will find any specific numbers any where. If you start out with a lean back equallling 1- 1,5 cm pr. meter of mast it will be a beginning for a good trim. My mast, on a LM27 has around 12 cm from top to deck. It is easy to measure....hang something heavy in the and let it hang just over the deck. There should be (in my case) 12 cm from mast to wire

[chrismunson]

See my Feb. 14 post on Ideas for Sharing I found the factory guide and posted it.