Hello we have an LM30 and find rainwater collects in the stern deck then seeps into the bilge (see photo) has anyone done a mod to drill a small scupper pipe in the rear upstand moulding. I have bought a length of 12mm ridged pipe and was going to drill and glue it in behind the rear stay plate. Any guidance / comments appreciated before I start drilling??
Hi Jon D After logging in select your post and you will see an edit tab. Click this and you will then see the add attachment tab. You may upload 3 photos to each separate post
Regards
Mick
Last Edit: Aug 23, 2019 18:19:36 GMT by oceandancer
As Mick says, you can add photos, etc., to your existing posts by using the 'Edit' button which appears on the right hand side of any post you have already made. You will then see a range of edit options along the top of the box in which you enter text. The 'Insert Image' one is 7th from the right.
If you start a new thread the edit options are visible from the start.
If you are replying to an existing thread, the 'Quick Reply' box at the bottom of the page does not include the edit options, but if you click on the dark 'Reply' button on the right hand side of the "Quick Reply' box, it will then change to a full reply box, complete with edit options, retaining any text you have already inserted.
(I only know this because I recently had to remind myself how it worked!)