Bukh saildrive propeller

[nauticalnick]

In the middle of replacing the saildrive anode and should there be an insulating washer between the cone nut and propeller ? There wasn't one when the nut came Off !

Many thanks,

Nick.

[Brian & Glenda]

Hi Nick, Assuming you have a Bukh DV10/20 36/48 ... it's my turn to answer your question... In the 'BUKH Saildrive Spare Parts List' illustrations, there is no washer between the cone nut and propeller. There is however, a 'throw-off washer' held in place with a slotted screw between the propeller and the zinc forward of the propeller. I can send you a copy of that illustration if you wish.

[nauticalnick]

Hi,
Thanks for replying. If you could send me a copy that would be great.

Many thanks,

Nick.

[Brian & Glenda]

Hi Nick,
Did you get a message from me with the attachment the other day? I thought I figured out how to send you a personal message with a link to Dropbox for this 11 page document, but perhaps not. (I'm not sure if there are copyright issues if I post it on the LM Owners board.) Let me know and I'll try again if necessary.

[nauticalnick]

Hi,
Unfortunately l didn't receive anything. Not too sure about the copyright situation though, perhaps those in the in know could advise ?

Thanks for trying.

Nick

[Brian & Glenda]

Try this link. Let me know when you get it, and I'll then delete it from Dropbox.

www.dropbox.com/s/ycsa7stow7hni25/Bukh%20DV36%20SME%20Saildrive.pdf?dl=0

[nauticalnick]

Hi,

Got it ! l have a Dropbox account so that's great.

Many thanks.

Nick